Great News for KITT Mustang Replica Builders!

[Pierre]

yeah like you said a liter of 95 octane gazoline cost 1,35 euros so a gallon about 6 euros or 7$ if you prefert ,you know why there is only small cylinder here , the most common is 1,1 or 1,5 liter engine with about 70 HP but with a fuel economy of almost 60 mpg. And car with bigger cylinder are not free taxe for a mustang it's about 3000$ juste for having the title .I hate our governement so stupid

[spawn]

He's Right about that here in Europe the gasoline prices are skyhigh.. here in Holland you do's see many V8's and in other words not many Kitt's... only kitt-Scanners in other vehicles.. like mine

gas-prices:
France $ 6.89 / gallon
Netherlands $ 7.91 / gallon

greets

[CJaguar442]

you should never fill up in canada it is $6 gallon too.

drill baby drilll keep the USA gas prices low thank god for the low gas prices that we have here.

[dylandog]

Hello i'll going to buy the momo trek r steering wheel, so my question is simple is it possible to take out the air bag and change the wheel? so if it's possible could you tell mehow to do it and if there is a post or a topic with pictures it will be great... Many thanks to all

see you

[krkitt1]

Well, The hood is back on the car!!!!

[krkitt1]

I need to get the scanner going now...... I have to start getting it ready for the first Carshow of the season this Sunday May 23rd

[tamatt27]

Looks great! krkitt1!!

Dylan, yes it is possible to remove the airbag. You have to do that in order to remove the steering wheel. There should be 2 small holes on the side of the airbag. These are access holes that a special tool is inserted in in order to depress locking tabs that hold the airbag in. First start off by disconnecting the battery and waiting about 15-20 mins to be safe... Insert a small pick and 'feel' around with it until you feel the tabs. Depress one at a time and hold that side of the airbag up while you do the other side.

[Slade]

Looking great krkitt

[dylandog]

Looks great! krkitt1!!

Dylan, yes it is possible to remove the airbag. You have to do that in order to remove the steering wheel. There should be 2 small holes on the side of the airbag. These are access holes that a special tool is inserted in in order to depress locking tabs that hold the airbag in. First start off by disconnecting the battery and waiting about 15-20 mins to be safe... Insert a small pick and 'feel' around with it until you feel the tabs. Depress one at a time and hold that side of the airbag up while you do the other side.

THANKS, but after to don't have
the light on i need to do something else? because i don't want the light switch on in the dash , manu thanks

[Pierre]

i've said you to use a 2 ohm resistor this is the value of the airbag and that will fake the car pcm
A lot of peoole just put the bulb out and drive without any airbag

[Slade]

Im curious about the suspension,did you guys have to change it order to adjust to KI3Ts rims? or is Stock suspension ok?

[Pierre]

you can use the stock suspension but it doesn't look good with 20 rims so it's better to lower the car

[taoworm2323]

My Knight 3000 update video: http://www.youtube.com/watch?v=EH8KIaHZ5I8" onclick="window.open(this.href);return false;

More surprises in store at the next KR Festival!

[Slade]

you can use the stock suspension but it doesn't look good with 20 rims so it's better to lower the car

The rims come in 18" right?I thought there were more sizes?

Nice job Tao,cant wait for next year

[krkitt1]

Well the hood is back at the shop being repainted. He was buffing the hood and burnt the clearcoat. I should get it back on Friday and the stripes go on Tuesday. I'm having 8" stripes put on.

[Pierre]

you can use the stock suspension but it doesn't look good with 20 rims so it's better to lower the car

The rims come in 18" right?I thought there were more sizes?

Nice job Tao,cant wait for next year

no 20 " the 18 are for the true KR and you can't buy them without the car ,the TV series car's rim are also 20"

[Slade]

no 20 " the 18 are for the true KR and you can't buy them without the car ,the TV series car's rim are also 20"

Doh!!! thought there were more sizes,ok so the attack mode pilot version the rims are just painted black right?

So glad I have you guys around the for help

Nice KRkitt1

[TURBOBOOST27]

Nice job dude, one thing though does gt500 nose line up with the stock mustang gt headlights and fendens?

[krkitt1]

Nice job dude, one thing though does gt500 nose line up with the stock mustang gt headlights and fendens?

Everything has to be changed except the fender. The bumpers, grilles, lights and all the brackets that go with the Shelby GT500 nose.

[Pierre]

yes the pilot attack mode has the rims painted black ^^

[Slade]

Is the Pilot attack mode hood the same or is it another hood all together?

[Pierre]

hood are all the same molded from an original KR hood

[Slade]

Thanks Pierre

[Slade]

Ok I have to come back to the gas question again.Will putting in Premium gas ruin the engine for a standard V8 GT?Or are you just wasting money on gas thats more expensive when the car doesnt need to take it and it really only needs regular?

Doing my homework

[tamatt27]

Ok I have to come back to the gas question again.Will putting in Premium gas ruin the engine for a standard V8 GT?Or are you just wasting money on gas thats more expensive when the car doesnt need to take it and it really only needs regular?

Doing my homework

I only use Premium. It won't hurt to put better gas in it than is req'd.